IEI Integration PPC-WIDS-51xxA-G41 - Manual (Page 63)

PPC-51xxA-G41/WIDS-51xA-G41 Panel PC
Page 51
4.8 PCIe Expansion Card Installation (Optional)
To install a PCI expansion card, please do the following.
Step 1: Remove the back panel. See Section 4.4.
Step 2: Install the PCIe riser card. Insert the PCIe riser card into the PCI slot and PCIe
x4 slot on the motherboard of the system. Secure the PCIe riser card to the
system with two retention screws.
Figure 4-21: Secure the PCIe Riser Card
Step 3: Remove the expansion slot cover. The expansion slot on the I/O panel
interface is secured to the system with a single retention screw. Remove the
screw.