C.1 introduction, C.2 dio connector pinouts, Ntroduction – IEI Integration PPC-WIDS-51xxA-G41 User Manual
Page 138: Onnector, Inouts
PPC-51xxA-G41/WIDS-51xA-G41 Panel PC
Page 126
C.1 Introduction
The DIO connector on the PPC-51xxA-G41/WIDS-51xA-G41 is interfaced to GPIO ports
on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs.
The digital inputs and digital outputs are generally control signals that control the on/off
circuit of external devices or TTL devices. Data can be read or written to the selected
address to enable the DIO functions.
NOTE:
For further information, please refer to the datasheet for the Super I/O
chipset.
C.2 DIO Connector Pinouts
The following table describes how the DIO connector pins are connected to the Super I/O.
Pin Description Super
I/O
Pin Super
I/O
Pin
No.
1 Ground
N/A
N/A
2 +5
V
N/A
N/A
3 Input
0
GP20
27
4 Output
0 GP14
31
5 Input
1
GP21
26
6 Output
1 GP15
30
7 Input
2
GP22
25
8 Output
2 GP16
29
9 Input
3
GP23
24
10 Output
3
GP17
28