IEI Integration AFL-W19A_W19B_17D_W15A-N270 v1.06 - Manual (Page 32)

AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 20
2.5.3 CF Card Setup
Jumper Label: JCF1
Jumper Type: 2-pin header
Jumper Settings: See Table 2-4
Jumper Location:
See Figure 2-8
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in Table 2-4.
CF Setup Description
Open Slave
Closed Master
Table 2-4: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 2-8.
Figure 2-8: CF Card Setup Jumper Location
2.5.4 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type: 3-pin header
Jumper Settings: See Table 2-5