IEI Integration AFL-W19A_W19B_17D_W15A-N270 v1.06 - Manual (Page 40)

AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 28
Figure 2-14: Monitor Stand
2.6.2 Cabinet and Rack
The AFL-W19A/W19B/17D/W15A-N270 flat panel PC can be installed into a cabinet or
rack. The installation procedures are similar to the panel mounting installation. To do this,
please follow the steps below:
NOTE:
When purchasing the cabinet/rack installation bracket, make sure it is
compatible with both the AFL-W19A/W19B/17D/W15A-N270 flat panel
PC and the rack/cabinet into which the
AFL-W19A/W19B/17D/W15A-N270 is installed.
Step 1: Slide the rear of the AFL-W19A/W19B/17D/W15A-N270 flat panel PC through
the rack/cabinet bracket until the aluminum frame is flush against the front of the
bracket (Figure 2-15).