Figure 2-23: secure the panel pc – IEI Integration AFL-W19A_W19B_17D_W15A-N270 v1.06 User Manual
Page 47
Advertising
AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 35
Figure 2-23: Secure the Panel PC
2.6.5 Panel Mounting (AFL-17D-N270 / AFL-W19A-N270 / AFL-W19B-N270)
To mount the panel PC into a panel, please follow the steps below.
Step 1:
Select the position on the panel to mount the flat panel PC.
Step 2:
Cut out a section corresponding to the size shown below. The size must be
smaller then the outer edge. Recommended cutout sizes are shown below.
Advertising