2 serial device connection, Figure 2-30: lan connection – IEI Integration AFL-W19A_W19B_17D_W15A-N270 v1.06 User Manual
Page 52
AFL-W19A/W19B/17D/W15A-N270 Panel PC
Page 40
Step 1:
Locate the RJ-45 connector
on the bottom panel of the
AFL-W19A/W19B/17D/W15A-N270.
Step 2:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the
AFL-W19A/W19B/17D/W15A-N270. See Figure 2-30..
Figure 2-30: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector.
Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 port.
Step 0:
2.7.2 Serial Device Connection
The serial device connectors are for connecting serial devices to the
AFL-W19A/W19B/17D/W15A-N270. Follow the steps below to connect a serial device to
the AFL-W19A/W19B/17D/W15A-N270 panel PC.
Step 1:
Locate the DB-9 connector
. The location of the DB-9 connector is shown in
Chapter 2
.
Step 2:
Insert the serial connector
.
Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See Figure 2-31.