IEI Integration AFL-08AH-N270 - Manual (Page 45)

AFL-08AH-N270-CR Panel PC
Page 31
Figure 4-7: Tighten the Panel Mounting Clamp Screws
4.7.3 Arm Mounting
The AFL-08AH-N270-CR is VESA (Video Electronics Standards Association) compliant
and can be mounted on an arm with a 75mm interface pad. To mount the
AFL-08AH-N270-CR on an arm, please follow the steps below.
Step 1: The arm is a separately purchased item. Please correctly mount the arm onto
the surface it uses as a base. To do this, refer to the installation documentation
that came with the mounting arm.
NOTE:
When purchasing the arm please ensure that it is VESA compliant and that
the arm has a 75 mm interface pad. If the mounting arm is not VESA
compliant it cannot be used to support the AFL-08AH-N270-CR flat panel
PC.