5 replacing components, 1 memory module replacement, Eplacing – IEI Integration AFL-08AH-N270 User Manual
Page 56: Omponents, Figure 5-2: aluminum back cover retention screws, Figure 5-3: afl-10a-n270 so-dimm socket location, R ( figure 5-2 )
Advertising
AFL-08AH-N270-CR Panel PC
Page 42
Figure 5-2: Aluminum Back Cover Retention Screws
Step 2:
Lift the aluminum cover off the AFL-08AH-N270-CR.
Step 0:
5.5 Replacing Components
5.5.1 Memory Module Replacement
The flat panel PC is preinstalled with a 1 GB DDR2 memory module. If the memory
module is fail, follow the instructions below to replace the memory module.
Step 1:
Remove the back cover. See Section 5.4.1 above.
Step 2:
Remove the internal aluminum back cover. See Section 5.4.2 above.
Step 3:
Locate the DDR2 SO-DIMM on the motherboard (Figure 5-3).
Figure 5-3: AFL-10A-N270 SO-DIMM Socket Location
Advertising