IEI Integration AFL-08AH-N270 - Manual (Page 46)

AFL-08AH-N270-CR Panel PC
Page 32
Step 2: Once the mounting arm has been firmly attached to the surface, lift the flat panel
PC onto the interface pad of the mounting arm.
Step 3: Align the retention screw holes on the mounting arm interface with those in the
flat panel PC. The AFL-08AH-N270-CR arm mount retention screw holes are
shown in Figure 4-8.
Figure 4-8: Arm Mounting Retention Screw Holes
Step 4: Secure the flat panel PC to the interface pad by inserting four retention screws
through the bottom of the mounting arm interface pad and into the flat panel PC.
Step 0:
4.7.4 Cabinet and Rack Installation
The AFL-08AH-N270-CR flat panel PC can be installed into a cabinet or rack. The
installation procedures are similar to the panel mounting installation. To do this, please
follow the steps below: