8 bottom panel connectors, 1 lan connection, Ottom – IEI Integration AFL-08AH-N270 User Manual
Page 49: Anel, Onnectors, Figure 4-12: lan connection
AFL-08AH-N270-CR Panel PC
Page 35
Step 5:
Once the flat panel PC with the attached rack/cabinet bracket has been properly
inserted into the rack or cabinet, secure the front of the rack/cabinet bracket to
the front of the rack or cabinet (Figure 4-11).
4.8 Bottom Panel Connectors
4.8.1 LAN Connection
There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection
to an external network. To connect a LAN cable with an RJ-45 connector, please follow
the instructions below.
Step 1:
Locate the RJ-45 connectors
on the bottom panel of the AFL-08AH-N270-CR.
Step 2:
Align the connectors.
Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the bottom panel of the AFL-08AH-N270-CR. See
Figure 4-12: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector.
Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector.
Step 0: