4 serial device connection, 1 db-9 serial port connection, Figure 3-28: lan connection – IEI Integration AFL2-10A-N28 User Manual
Page 58
AFL2-10A-N28 Panel PC
Page 41
Figure 3-28: LAN Connection
Step 3:
Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the external interface.
3.12.4 Serial Device Connection
There are two external RS-232 connectors (one by DB-9 and one by RJ-45) and one
RS-422/485 RJ-45 connector for serial device connection. Follow the steps below to
connect a serial device to the AFL2-10A-N28.
3.12.4.1 DB-9 Serial Port Connection
Follow the steps below to connect a serial device to the DB-9 connector of the
AFL2-10A-N28 panel PC.
Step 1:
Locate the DB-9 connector. The location of the DB-9 connectors is shown in
Chapter 1.
Step 2:
Insert the serial connector. Insert the DB-9 connector of a serial device into
the DB-9 connector on the bottom panel. See Figure 3-29.