IEI Integration IBS-19A - Manual (Page 40)

IBS-19A Series Medical Panel PC
Page 40
LED Description LED Description
A on: linked
blinking: data is being sent/received
B off: 10 Mb/s
green: 100 Mb/s
orange: 1000 Mb/s
Table 3-3: RJ-45 Ethernet Connector LEDs
To connect the IBS-19A Series to a network through the RJ-45 LAN connector, follow the
steps below.
Step 1: Locate the RJ-45 connector. The location of the RJ-45 connectors is shown in
Section 1.4.4 .
Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of
the RJ-45 connectors on the IBS-19A Series. See Figure 3-9.
Figure 3-9: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector.