5 top view, 6 bottom view, 7 srm series i/o panel – IEI Integration SRM_121_150 v2.02 User Manual
Page 18: Figure 1-6: top view, Figure 1-7: bottom view
Advertising
SRM Series/SRM-KIT Series Monitor
Page 8
1.2.5 Top View
The top view provides access to retention screws that secure the back cover to the
chassis. The retention screw holes are circled in Figure 1-6 below.
Figure 1-6: Top View
1.2.6 Bottom View
The bottom view provides access to retention screws that secure the back cover to the
chassis. The retention screw holes are circled in Figure 1-7 below.
Figure 1-7: Bottom View
1.2.7 SRM Series I/O Panel
The I/O panel of the SRM Series shown in Figure 1-8 has the following interfaces.
1 x RS-232 connector touch panel interface
1 x USB connector touch panel interface
1 x 9~36V DC terminal block
1 x 12V DC input connector
1 x VGA connector
1 x DVI-D connector
Advertising