2 cabinet and rack installation, Figure 5-8: panel mounting clamp position – IEI Integration SRM_121_150 v2.02 User Manual
Page 55
SRM Series/SRM-KIT Series Monitor
Page 45
Step 5:
Tighten the screws that pass through the panel mounting clamps until the plastic
caps at the front of all the screws are firmly secured to the panel (Figure 5-8).
Figure 5-8: Panel Mounting Clamp Position
5.5.2 Cabinet and Rack Installation
The SRM series provides optional rack mount kits for industrial racks. To mount the SRM
series LCD monitor into a cabinet/rack, please follow the steps below.
Step 1:
The back of the metal frame surrounding the SRM series LCD monitor has
several retention screw holes for a rack mount kit. See Figure 1-10 and Figure
Step 2:
Slide the monitor through the rack mount kit until the rear side of the monitor
frame is flushed against the front of the rack mount kit.
Step 3:
Make sure the retention screw holes at the rear of the monitor frame are aligned
with the retention screw holes in the rack mount kit.