Figure 5-11: wall-mounting bracket – IEI Integration SRM_121_150 v2.02 User Manual
Page 58
Advertising
SRM Series/SRM-KIT Series Monitor
Page 48
Step 5:
Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (Figure 5-11).
Figure 5-11: Wall-mounting Bracket
Step 6:
Insert the four monitor mounting screws provided in the wall mounting kit into the
four screw holes on the real panel of the monitor and tighten until the screw
shank is secured against the rear panel (Figure 5-12).
Advertising