IEI Integration EP-308A v1.12 - Manual (Page 19)

EP-308A POS
Page 9
WARNING!
Only remove the protective plastic cover stuck to the front screen after
installation. The plastic layer protects the monitor surface during
installation process.
Step 9: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 10: Open the outside box.
Step 11: Carefully cut the tape sealing the box. Only cut deep enough to break the tape.
Step 12: Open the inside box.
Step 13: Lift the monitor out of the boxes.
Step 14: Remove the peripheral parts box from the main box. S te p 0 :
2.2 Packing List
The EP-308A flat panel PC is shipped with the following components:
Quantity Item Image
1 EP-308A
1 Power adapter (70 W)
1 AC power cable
1 Touch screen pen