IEI Integration EP-308A v1.12 - Manual (Page 47)

EP-308A POS
Page 37
Î
Auto D EFAULT
BIOS auto detects the PIO mode. Use this value if the IDE disk
drive support cannot be determined.
Î
0 PIO mode 0 selected with a maximum transfer rate of 3.3 MB/s
Î
1 PIO mode 1 selected with a maximum transfer rate of 5.2 MB/s
Î
2 PIO mode 2 selected with a maximum transfer rate of 8.3 MB/s
Î
3 PIO mode 3 selected with a maximum transfer rate of 11.1 MB/s
Î
4
PIO mode 4 selected with a maximum transfer rate of 16.6 MB/s
(This setting generally works with all hard disk drives
manufactured after 1999. For other disk drives, such as IDE
CD-ROM drives, check the specifications of the drive.)
ƒ DMA Mode [Auto]
Use the DMA Mode BIOS selection to adjust the DMA mode options.
Î
Auto D EFAULT
BIOS auto detects the DMA mode. Use this value if the IDE
disk drive support cannot be determined.
Î
SWDMA0 Single Word DMA mode 0 selected with a maximum data
transfer rate of 2.1 MB/s
Î
SWDMA1 Single Word DMA mode 1 selected with a maximum data
transfer rate of 4.2 MB/s
Î
SWDMA2 Single Word DMA mode 2 selected with a maximum data
transfer rate of 8.3 MB/s
Î
MWDMA0 Multi Word DMA mode 0 selected with a maximum data
transfer rate of 4.2 MB/s
Î
MWDMA1 Multi Word DMA mode 1 selected with a maximum data
transfer rate of 13.3 MB/s
Î
MWDMA2 Multi Word DMA mode 2 selected with a maximum data
transfer rate of 16.6 MB/s
Î
UDMA0 Ultra DMA mode 0 selected with a maximum data transfer
rate of 16.6 MB/s