IEI Integration EP-308A v1.12 - Manual (Page 49)

EP-308A POS
Page 39
3.3.3 Super IO Configuration
Use the Super IO Configuration menu (BIOS Menu 6) to set or change the
configurations for the FDD controllers, parallel ports and serial ports.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Configure Super I/O Chipset
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
Serial Port1 Address
[3F8/IRQ4]
Serial Port1 Mode [Normal]
Serial Port3 Address [3E8]
Serial Port3 IRQ [11]
Select RS232 or RS422/485 [RS422/RS485]
Allows BIOS to select
Serial Port1 Base
Addresses
ÅÆ Select
Screen
↑ ↓ Select
Item
Enter Go to SubScreen
F1 General
Help
F10 Save and Exit
ESC Exit
V02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 6: Super IO Configuration
ƒ Serial Port1 Address [3F8/IRQ4]
Selects the serial port base address.
Î
Disabled No base address
Î
3F8/IRQ4 D EFAULT I/O address 3F8 and interrupt address IRQ4
Î
3E8/IRQ4 I/O address 3E8 and interrupt address IRQ4
Î
2E8/IRQ3 I/O address 2E8 and interrupt address IRQ3
ƒ Serial Port1 Mode [Normal]
Selects the mode for the serial port.
Î
Normal D EFAULT Normal mode
Î
IrDA
IrDA mode
Î
ASK IR ASKIR mode