IEI Integration EP-308A v1.12 - Manual (Page 26)

EP-308A POS
Page 16
Figure 2-8: VGA Connector
Step 4: Secure the connector . Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector. Step 0:
2.6 Power Connection
To connect the power adapter, do the following.
Step 1: Connect the power adapter to the EP-308A.
Step 2: Connect the power adapter to the mains power. S te p 0 :
2.7 Driver Installation
NOTE:
The contents of the CD may vary throughout the life cycle of the
product and is subject to change without prior notice. Visit the IEI
website or contact technical support for the latest updates.