Lincoln Electric IM10029 POWER WAVE S350CE - Manual (Page 28)

C-1 ACCESSORIES C-1
POWER WAVE® S350CE
KITS, OPTIONS AND ACCESSORIES
All Kits Options and Accessories are found on the
Web site: (www.lincolnelectric.com)
FACTORY INSTALLED
None Available
FIELD INSTALLED OPTIONS
GENERAL OPTIONS
DeviceNet Kit
Mounts inside the back of the Power Wave
® S350CE.
Allows Devicenet objects to communicate with the
Power Wave
® S350CE.
Order K2827-1
Work Voltage Sense Lead Kit
Required to accurately monitor voltage at the arc.
Order K940-XX Series
Order K1811-XX Series
Deluxe Adjustable Gas Regulator & Hose Kit
Accommodates CO
2
, Argon, or Argon-blend gas cylin-
ders. Includes a cylinder pressure gauge, dual scale
flow gauge and 4.3 ft. (1.3 m) gas hose.
Order K586-1
Work and Wire Feeder 2/0 Weld Cable Package
Includes Twist-Mate™ connectors, work clamps, 15 ft.
(4.5 m) work cable and 10 ft. (3.0 m) electrode cable.
Rated 350 amps, 60% duty cycle.
Order K1803-1
Twist-Mate™ Cable Plug
For connecting welding cable to output terminal recep-
tacles. For 1/0-2/0 (50-70 mm
2 ) cable.
Order K852-70
Twist-Mate™ Cable Plug
For connecting welding cable to output terminal recep-
tacles. For 2/0-3/0 (70-95 mm
2 ) cable.
Order K852-95
Twist-Mate™ Cable Receptacle
For connecting welding cable to Twist-Mate™ Cable
Plug.
Order K1759-70 for 1/0-2/0 (50-70 mm2) cable
Order K1759-95 for 2/0-3/0 (70-95mm2) cable
Twist-Mate™ to Lug Adapter
For connection of lugged cable to Twist-Mate™ con-
nectors. 18" (457 mm) long.
Order K2176-1
Dual Cylinder Kit
Permits side-by-side mounting of two full size gas
cylinders, with easy loading. For use with K1764-1
cart.
Order K1702-1
Coaxial Welding Cable
Optimum weld cables for minimizing cable inductance
and optimizing welding performance.
Order K1796-25 for 25 feet 25 ft. (7.6 m) cable
length.
Order K1796-50 for 50 feet 50 ft. (15.2 m) cable
length.
Order K1796-75 for 75 feet 75 ft. (22.9 m) cable
length.
Order K1796-100 for 100 feet 100 ft. (30.5 m) cable
length.
Welding Fume Extractors
Lincoln offers a wide range of fume extraction environ-
mental system solutions, ranging from portable sys-
tems easily wheeled around a shop to shop-wide cen-
tral systems servicing many dedicated welding sta-
tions.
Request Lincoln publication E13.40
(See www.lincolnelectric.com)
STT® MODULE
Mounts directly below the power source, to enable the
advance waveform control technology of STT
®.
STT ® is a controlled GMAW short circuit transfer
process that uses current controls to adjust the heat
independent of the wire feed speed, resulting in supe-
rior arc performance, good penetration, low heat input
control, reduced spatter and fumes.
Order K2921-1
COOLARC 50
This module mounts directly under the power source
and enables water-cooled MIG or TIG applications.
The module is powered and controlled by the power
source and is equipped with a pump and fan on
demand features.
Order K14050-1.