Agilent Technologies N9010A - Manual (Page 153)

Chapter 15 153
Option YAS - Y-Axis Screen Video Output
Other Y-Axis Screen Video Output Specifications
Other Y-Axis Screen Video Output Specifications
General Port Specifications
Screen Video
Description Specifications Supplemental Information
Connector BNC female Shared with other options
Impedance <140
Ω (nominal)
Description Specifications Supplemental Information
Operating Conditions
Display Scale Types All (Log and Lin) “Lin” is linear in voltage
Log Scales All (0.1 to 20 dB/div)
Modes Spectrum Analyzer only
FFT & Sweep Select sweep type = Swept.
Gating Gating must be off.
Output Signal
Replication of the RF Input
Signal envelope, as scaled by
the display settings
Differences between display
effects and video output
Detector = Peak, Negative,
Sample, or Normal The output signal represents
the input envelope excluding
display detection
Average Detector The effect of average
detection in smoothing the
displayed trace is
approximated by the
application of a low-pass filter Nominal
bandwidth:
EMI Detectors The output will not be useful.
Trace Averaging Trace averaging affects the
displayed signal but does not
affect the video output
π ⋅
−
=
SweepTime
Npoints
LPFBW
1