Agilent Technologies N9010A - Manual (Page 191)

191
21 Bluetooth Measurement Application
This chapter contains specifications for N9081A-2FP Bluetooth measurement application. Three
standards, Bluetooth 2.1-basic rate, Bluetooth 2.1-EDR and Bluetooth 2.1-low energy are supported.
Three power classes, class 1, class 2 and class 3 are supported. Specifications for the three standards
above are provided separately.
Additional Definitions and Requirements
Because digital communications signals are noise-like, all measurements will have variations. The
specifications apply only with adequate averaging to remove those variations. The specifications apply
in the frequency range documented in In-Band Frequency Range.
The specifications apply in the frequency range documented in In-Band Frequency Range.
The specifications for this chapter apply only to instruments with Frequency Option 503, 507, 513 or
526. For Instruments with higher frequency options, the performance is nominal only and not subject to
any warranted specifications.