Agilent Technologies N9010A - Manual (Page 70)

70 Chapter 1
Agilent EXA Signal Analyzer
General
b. Factory preset, fixed center frequency, RBW = 1 MHz, 10 MHz < span
≤ 600 MHz, stop frequency ≤
3.6 GHz, Auto Align Off.
c. Phase Noise Optimization set to Fast Tuning, Display Off, 32 bit integer format, markers Off, single
sweep, measured with IBM compatible PC with 2.99 GHz Pentium® 4 with 2 GB RAM running Win-
dows® XP, Agilent I/O Libraries Suite Version 14.1, one meter GPIB cable, National Instruments
PCI-GPIB Card and NI-488.2 DLL.
Description Specifications Supplemental Information
Display
a
a. The LCD display is manufactured using high precision technology. However, there may be up to six
bright points (white, blue, red or green in color) that constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not affect the measurement integrity of the product in
any way.
Resolution 1024
× 768
XGA
Size 213 mm (8.4 in) diagonal (nominal)
Description Specifications Supplemental Information
Data Storage
Standard
Internal Total Removeable solid state drive (
≥ 80 GB) a
a. For earlier instruments (<MY50210341/SG50210026/US50210103), a removable hard disk drive
(>80 GB) was installed. For even older instruments, a fixed hard disk (40 GB) drive was installed.
Internal User
≥ 9 GB available for user data
With Option PC4
Internal Total Removeable solid state drive (
≥ 80 GB) b
b. For earlier instruments (<MY50210341/SG50210026/US50210103), a removable hard disk drive (>80
GB) was installed with Option PC2 unless Option SSD was ordered.
Internal User
≥ 9 GB available on separate partition for
user data
Description Specifications Supplemental Information
Weight Weight without options
Net 16 kg (35 lbs) (nominal)
Shipping 28 kg (62 lbs) (nominal)
Cabinet Dimensions Cabinet dimensions exclude front and
rear protrusions.
Height 177 mm (7.0 in)
Width 426 mm (16.8 in)
Length 368 mm (14.5 in)