Agilent Technologies N9010A - Manual (Page 315)

Chapter 35 315
WLAN Measurement Application
Measurements
Description Specifications Supplemental Information
CCK 11Mbps
(RF Input Level = –10 dBm,
Attenuation = 10 dB)
Radio standard is:
802.11/b/g (DSSS/CCK/PBCC)
Center Frequency in 2.4 GHz Band
20 to 30°C CReference Filter: Gaussian
EVM
Floor
ab
(EQ Off) –36.2 dB (1.55%) –39.7 dB (1.03%) (nominal)
Floor(EQ On) –46.0 dB (0.50%) (nominal)
Accuracy
(EVM Range: 0 to 2.0%) ±0.90% (nominal)
(EVM Range: 2 to 20.0%) ±0.40% (nominal)
Frequency Error
Range ±100 kHz (nominal)
Accuracy ±10 Hz + tfa
c
(nominal)
a. In these specifications, those values with dB units are the specificatons, while those with 5 units, in
parentheses, are conversions from the dB units to % for reader convenience.
b. The EVM Floor specification applies when Phase Noise Optimization is set to Wide-offset (>30 kHz)
c. tfa = transmitter frequency
Χ frequency reference accuracy.