Wiegmann Non-Metallic Series - Manual (Page 30)

www.hubbell-wiegmann.com
Data Subject To Change Without Notice
A L N 4 S E R I E S E N C L O S U R E S
N E M A 4 X S I N G L E D O O R W A L L - M O U N T
E30
F E AT U R E S - S P E C I F I C AT I O N S
Applications
This lightweight enclosure provides
long-lasting protection for housing
electrical components in highly corro-
sive environments. It is used in both
indoor and outdoor settings that are
frequently wet or have constant expo-
sure to water, other liquids, or contami-
nants. Suitable for use in petro-chemi-
cal plants, sewage plants, marine
environments, and similar installations.
Construction
• Bodies and doors fabricated from
.080-inch thick (2 millimeters)
5052-H32 aluminum
• Continuously welded seams ground
smooth, no holes or knockouts
Industry Standards
UL 508, Types 4, 4X, 12 & 13
CSA Certified, Types 4 & 12
NEMA/EEMAC Types 4, 12 & 13
UL File E64791
CSA File LL66078
• Door and body stiffeners are provided
in larger enclosures for extra rigidity
• Rolled lip on three sides of door and all
sides of enclosure opening is provided
to exclude liquids and contaminants
• Quick and easy to operate stainless
steel door clamps are provided
• Doors are removable by pulling
stainless steel continuous hinge pin
• Hasp and staple for padlocking
• Print pocket is provided
• Closed cell oil resistant neoprene gasket
• Collar studs provided for mounting
optional sub panels
• External mounting feet for mounting
enclosure
BACK PANEL STIFFENER
CATALOG ENCLOSURE SIZE
CATALOG NUMBER*
BACK PANEL
F
DOOR BODY
E
NUMBER H X W X D
WHITE ALUM.
SIZE A X B
ALN4161206 16.00x12.00x6.00 (406x305x152) NP1612 ALNP1612 13.00x 9.00 (330x229) 1.25 (32) No No —
ALN4201606 20.00x16.00x 6.00 (508x406x152) NP2016 ALNP2016 17.00x13.00 (432x330) 3.00 (76) No No —
ALN4202006 20.00x20.00x 6.00 (508x508x152) NP2020 ALNP2020 17.00x17.00 (432x432) 3.00 (76) No No —
ALN4242006 24.00x20.00x 6.00 (610x508x152) NP2420 ALNP2420 21.00x17.00 (533x432) 3.00 (76) No No 4.313 (110)
ALN4161608 16.00x16.00x 8.00 (406x406x203) NP1616 ALNP1616 13.00x13.00 (330x330) 3.00 (76) No No —
ALN4242408 24.00x24.00x 8.00 (610x610x203) NP2424 ALNP2424 21.00x21.00 (533x533) 3.00 (76) No No 4.313 (110)
ALN4302408 30.00x24.00x 8.00 (762x610x203) NP3024 ALNP3024 27.00x21.00 (686x533) 3.00 (76) No No 5.813 (148)
ALN4362408 36.00x24.00x 8.00 (914x610x203) NP3624 ALNP3624 33.00x21.00 (838x533) 3.00 (76) No No 7.313 (186)
ALN4363008 36.00x30.00x 8.00 (914x762x203) NP3630 ALNP3630 33.00x27.00 (838x686) 3.00 (76) No Yes 7.313 (186)
ALN4483608 48.00x36.00x 8.00 (1219x914x203) NP4836 ALNP4836 45.00x33.00 (1143x838) 3.00 (76) Yes Yes —
ALN4201610 20.00x16.00x10.00 (508x406x254) NP2016 ALNP2016 17.00x13.00 (432x330) 3.00 (76) No No —
ALN4242010 24.00x20.00x10.00 (610x508x254) NP2420 ALNP2420 21.00x17.00 (533x432) 3.00 (76) No No 4.313 (110)
ALN4242410 24.00x24.00x10.00 (610x610x254) NP2424 ALNP2424 21.00x21.00 (533x533) 3.00 (76) No No 4.313 (110)
ALN4302412 30.00x24.00x12.00 (762x610x305) NP3024 ALNP3024 27.00x21.00 (686x533) 3.00 (76) No No 5.813 (148)
ALN4363012 36.00x30.00x12.00 (914x762x305) NP3630 ALNP3630 33.00x27.00 (838x686) 3.00 (76) No Yes 7.313 (186)
ALN4603612 60.00x36.00x12.00 (1524x914x305) NP6036 ALNP6036 57.00x33.00 (1448x838) 3.00 (76) Yes Yes 6.656 (169)
A L N 4 S E R I E S S I N G L E D O O R A L U M I N U M E N C L O S U R E S
• Grounding provisions provided
• Optional back panels must be
ordered separately
Finish
• All exterior surfaces of enclosures
have a smooth grained finish
• Optional aluminum back panels
are unpainted (See page I4)
• Optional steel back panels are
white polyester powder (See
page I4)
Accessories
• Back panels (reference tables)
• See pages J1-J22
ALN4161206
*Back panels must be ordered separately.