Wiegmann Non-Metallic Series - Manual (Page 62)

J I C S E R I E S N O N - M E TA L L I C E N C L O S U R E S
O PA Q U E , L I F T- O F F C O V E R W I T H F O U R S C R E W S
E62
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
F E AT U R E S - S P E C I F I C AT I O N S
Construction
• Hot compression molded fiberglass
reinforced thermoset polyester
• Poured polyurethane seamless
gasket provides watertight, dust-
tight environmental seal
• Recessed pan head screws –
no protruding surfaces
• 300 Series stainless used on all
external hardware
• Rounded edges, minimal protru-
sions or exposed pocket area for
accumulation of dust or debris
Industry Standards
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• CSA Standard C22.2 Types 1, 3, 4x, 6P, 12
• NEMA Standard 250 Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Non-flame propagating
• Molded in flange for easy mounting
• Panel mounting capability for fixed
rear panel
• Raised bosses with brass inserts
accepting 10-32 screws for optional
panel mounting
• Stainless steel beaded cover reten-
tion chain
• Workable material cuts, drills,
punches and saws with ease and
accuracy
• Submersible, non-corrosive environ-
mental design
• Lift off cover
• Non-conductive, impact resistant,
UV resistant
• Smooth surface, no color variations,
swirls or color pockets, no voids
Accessories
• See pages E77-E79
HW-J100805SC
CROWNED COVER MODEL SHOWN
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters).
*Note: In crowned cover units, the center of the cover is raised 3/4". Crowned cover is available only in 10x8x5 size enclosure.
PART NUMBER
ENCLOSURE OVERALL
SIZE HxWxD
ENCLOSURE INSIDE
AxBxC
WT.
CARBON STEEL
SUBPANEL
FIBERGLASS
SUBPANEL
STAINLESS
STEEL SUBPANEL
ALUMINUM
SUBPANEL
J I C S E R I E S W I T H O PA Q U E , L I F T O F F, F O U R - S C R E W C O V E R
HW-J60404SC
7.50 x 5.43 x 4.75
(191 x 138 x 121) 5.84 x 3.85 x 4.45
(148 x 98 x 113)
2.5 lbs. HW-MP604CS HW-MP604FG HW-MP604SS HW-MP604A
HW-J60604SC
7.50 x 7.50 x 4.75
(191 x 191 x 121) 5.72 x 5.72 x 4.45
(145 x 145 x 113)
2.75 lbs. HW-MP606CS HW-MP606FG HW-MP606SS HW-MP606A
HW-J80604SC
9.62 x 7.50 x 4.74
(244 x 191 x 121) 7.73 x 5.74 x 4.45
(196 x 146 x 113)
3.5 lbs. HW-MP806CS HW-MP806FG HW-MP806SS HW-MP806A
HW-J100804SC
11.62 x 9.41 x 4.25
(295 x 239 x 108) 9.73 x 7.73 x 3.98
(247 x 196 x 101)
5 lbs. HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J100805SC
(crowned cover)* 11.62 x 9.37 x 5.06
(295 x 238 x 129) 9.73 x 7.73 x 4.83
(247 x 196 x 123)
5 lbs. HW-MP1008CS HW-MP1008FG HW-MP1008SS HW-MP1008A
HW-J121005SC
13.56 x 11.43 x 5.21
(344 x 291 x 132) 11.79 x 9.80 x 4.94
(299 x 249 x 125)
6.5 lbs. HW-MP1210CS HW-MP1210FG HW-MP1210SS HW-MP1210A
HW-J141206SC
15.50 x 13.50 x 6.25
(394 x 343 x 159) 13.53 x 11.55 x 5.94
(344 x 293 x 151)
8.5 lbs. HW-MP1412CS HW-MP1412FG HW-MP1412SS HW-MP1412A
HW-J161406SC
17.53 x 15.46 x 6.23
(445 x 393 x 158) 15.63 x 13.60 x 5.94
(397 x 345 x 151)
11.5 lbs. HW-MP1614CS HW-MP1614FG HW-MP1614SS HW-MP1614A
HW-J181608SC
19.62 x 17.61 x 8.82
(498 x 447 x 224) 17.69 x 15.69 x 8.45
(449 x 399 x 215)
19.25 lbs. HW-MP1816CS HW-MP1816FG HW-MP1816SS HW-MP1816A
HW-J201608SC
22.00 x 17.68 x 8.83
(559 x 449 x 224) 19.72 x 15.72 x 8.45
(501 x 399 x 215)
20.25 lbs. HW-MP2016CS HW-MP2016FG HW-MP2016SS HW-MP2016A
U L F i l e E 6 4 7 9 1 C S A F i l e 2 2 2 8 7 3