Wiegmann Non-Metallic Series - Manual (Page 59)

P U S H B U T T O N I N - L I N E S E R I E S N O N - M E TA L L I C E N C L O S U R E S
2 2 M M P U S H B U T T O N I N - L I N E W I T H L I F T- O F F C O V E R
E59
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
F E AT U R E S - S P E C I F I C AT I O N S
Industry Standards
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• CSA Standard C22.2 Types 1, 3, 4x, 6P, 12
• NEMA Standard 250 Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Non-flame propagating
HW-N4X4PB-SS
Construction
• Hot compression molded fiberglass
reinforced thermoset polyester
• Poured polyurethane seamless
gasket provides watertight, dust-
tight environmental seal
• Recessed captive stainless steel
screws
• 300 Series stainless steel used on
all external hardware
• Workable material cuts, drills, punches
and saws with ease and accuracy
• Optional mounting foot kit available
• Rounded edges, minimal protru-
sions or exposed pocket area for
accumulation of dust or debris
• Metal grounding strap
• Submersible, non-corrosive environ-
mental design
• Lift off cover with four cover screws
• Non-conductive, impact resistant,
UV resistant
• Smooth surface, no color variations,
swirls or color pockets, no voids
• Color: Gray
Accessories
• For Optional Mounting Foot Kit
for Slim Line Series see page E77
(Ref: HW-N4XMGFTKIT)
• See pages E77-E79
2 2 M M P U S H B U T T O N I N - L I N E S E R I E S W I T H L I F T- O F F C O V E R
Note: Dimensions in inches (millimeters); letters in table correspond to letters on dimensional drawings.
HW-N4X1PB-22 1 6.63 x 3.81 x 3.89 (168 x 97 x 99) 6.00 x 3.19 x 3.63 (153 x 81 x 92) 5.31 (135) 2.5 (64) 4.88 (124) 2.94 (75) 4.13 (105) 2.19 (56) 3.31 (84) 2 lbs.
HW-N4X2PB-22 2 6.63 x 3.81 x 3.89 (168 x 97 x 99) 6.00 x 3.19 x 3.63 (153 x 81 x 92) 5.31 (135) 2.5 (64) 4.88 (124) 2.94 (75) 4.13 (105) 2.19 (56) 2.53 (64) 2 lbs.
HW-N4X3PB-22 3 6.63 x 3.81 x 3.89 (168 x 97 x 99) 6.00 x 3.19 x 3.63 (153 x 81 x 92) 5.31 (135) 2.5 (64) 4.88 (124) 2.94 (75) 4.13 (105) 2.19 (56) 1.75 (44) 2 lbs.
HW-N4X4PB-22 4 8.88 x 3.81 x 3.89 (225 x 97 x 99) 8.26 x 3.19 x 3.63 (210 x 81 x 92) 7.56 (192) 2.5 (64) 7.13 (181) 2.94 (75) 6.38 (162) 2.19 (56) 2.09 (53) 2 lbs.
HW-N4X5PB-22 5 11.13 X 3.81 X 3.89 (283 X 97 X 99) 10.51 x 3.19 x 3.63 (267 x 81 x 92) 9.81 (249) 2.5 (64) 9.37 (238) 2.94 (75) 8.63 (219) 2.19 (56) 2.44 (62) 2 lbs.
HW-N4X6PB-22 6 11.13 X 3.81 X 3.89 (283 X 97 X 99) 10.51 x 3.19 x 3.63 (267 x 81 x 92) 9.81 (249) 2.5 (64) 9.37 (238) 2.94 (75) 8.63 (219) 2.19 (56) 1.66 (42) 3 lbs.
HW-N4X7PB-22 7 13.78 x 3.63 x 3.14 (350 x 92 x 80) 13.19 x 3.03 x 2.87 (335 x 77 x 73) 12.53 (318) 2.38 (60) 12.37 (314) 2.75 (70) 11.66 (296) 2.03 (52) 2.20 (56) 3 lbs.
PART
NUMBER
PB
CUTOUTS
ENCLOSURE OVERALL SIZE
HxWxD
ENCLOSURE INSIDE
DIMENSIONS AxBxC
I J K L M N O WT.
U L F i l e E 6 4 7 9 1 C S A F i l e 2 2 2 8 7 3