Wiegmann Non-Metallic Series - Manual (Page 57)

SLIM LINE SERIES NON-METALLIC ENCLOSURES
JUNCTION BOX WITH LIFT-OFF OPAQUE COVER
E57
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
F E AT U R E S - S P E C I F I C AT I O N S
Construction
• Hot compression molded fiberglass
reinforced thermoset polyester
• Poured polyurethane seamless
gasket provides watertight dust-
tight environmental seal
• NEMA 4X rating
• Workable material cuts, drills, punch-
es and saws with ease and accuracy
• Four recessed captive stainless
steel screws
• 300 Series stainless steel used on
all external hardware
• Optional mounting foot kit available
• Raised bosses with brass inserts
accepting 10-32 screws for optional
panel mounting
• Rounded edges, minimal protru-
sions or exposed pocket areas for
accumulation of dust or debris
• Non-corrosive in chemical exposure
• Rated watertight and submersible
for long periods
• High impact resistance
• Non-conductive double insulated
material
• Lift-off cover with four cover screws
• Smooth surface, no color variations,
swirls or color pockets, no voids
• Optional carbon steel back panel
available
• Color: Gray
Accessories
• For Optional Mounting Foot Kit
for Slim Line Series see page E77
(Ref: HW-N4XMGFTKIT)
• See pages E77-E79
HW-N4X763SC
Industry Standards
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• CSA Standard C22.2 Types 1, 3, 4x, 6P, 12
• NEMA Standard 250 Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Non-flame propagating
C L E A R , H I N G E D C O V E R W I T H L I N K L O C K L AT C H E S P R E M I E R S E R I E S N O N - M E TA L L I C E N C L O S U R E S
Note: Subpanels must be ordered separately. Dimensions in inches (millimeters); letters in table correspond to letters on dimensional drawings.
HW-N4X763SC
7.63 x 6.63 x 3.19
(194 x 168 x 81) 6.90 x 5.90 x 2.88
(175 x 150 x 73)
3 lbs. HW-MP706CS
5.37 x 5.63
(137 x 143) 2.48
(63) 5.37
(137) 4.25
(108) 4.52
(115) 4.9
(124)
HW-N4X963SC
9.87 x 6.63 x 3.19
(251 x 168 x 81) 9.15 x 5.90 x 2.88
(232 x 150 x 73)
3 lbs. HW-MP906CS
7.62 x 5.63
(194 x 143) 2.48
(63) 7.62
(194) 4.25
(108) 6.77
(172) 4.9
(124)
PART NUMBER
ENCLOSURE OVERALL SIZE
HxWxD
ENCLOSURE INSIDE
AxBxC
WT.
CARBON STEEL
SUBPANEL
MOUNTING
ExF
J K L M N
U L F i l e E 6 4 7 9 1 C S A F i l e 2 2 2 8 7 3