Wiegmann Non-Metallic Series - Manual (Page 56)

S L I M L I N E S E R I E S N O N - M E TA L L I C E N C L O S U R E S
J U N C T I O N B O X W I T H L I F T- O F F O PA Q U E C O V E R
E56
F E AT U R E S - S P E C I F I C AT I O N S
www.hubbell-wiegmann.com
Data Subject To Change Without Notice
Industry Standards
• UL/cUL 50/508, Types 1, 3, 4X, 6P, 12
• CSA Standard C22.2 Types 1, 3, 4X, 6P, 12
• NEMA Standard 250 Types 1, 3, 4x, 6P, 12
• Temperature Range: -40°F to 250°F
(-40°C to 120°C)
• Flammability Rating: UL94-5V
• Non-flame propagating
HW-N4X1144
Construction
• Hot compression molded fiberglass
reinforced thermoset polyester
• Poured polyurethane seamless
gasket provides watertight dust-
tight environmental seal
• NEMA 4X rating
• Workable material cuts, drills, punch-
es and saws with ease and accuracy
• Four recessed captive stainless
steel screws
• Optional mounting foot kit available
• 300 Series stainless steel used on
all external hardware
• Raised bosses with brass inserts
accepting 10-32 screws for optional
panel mounting
• Rounded edges, minimal protru-
sions or exposed pocket areas for
accumulation of dust or debris
• Non-corrosive in chemical exposure
• Rated watertight and submersible
for long periods
• High impact resistance
• Non-conductive double insulated
material
• Lift-off cover with four cover screws
• Smooth surface, no color variations,
swirls or color pockets, no voids
• Color: Gray
Accessories
• For Optional Mounting Foot Kit
for Slim Line Series see page E77
(Ref: HW-N4XMGFTKIT)
• See pages E77-E79
C L E A R , H I N G E D C O V E R W I T H L I N K L O C K L AT C H E S P R E M I E R S E R I E S N O N - M E TA L L I C E N C L O S U R E S
PART
NUMBER
ENCLOSURE OVERALL SIZE
HxWxD
ENCLOSURE INSIDE AxBxC I J K L M N WT.
HW-N4X332 3.72 x 3.63. x 2.95 (95 x 92 x 75) 3.13 x 3.03 x 2.70 (79 x 77 x 69) 3.22 (82) 2.12 (54) 2.31 (59) 2.75 (70) 1.59 (40) 2.03 (52) 1 lb.
HW-N4X532 5.97 x 3.63 x 3.14 (152 x 92 x 80) 5.38 x 3.03 x 2.87 (137 x 77 x 73) 4.72 (120) 2.38 (60) 4.56 (116) 2.75 (70) 3.84 (98) 2.03 (52) 1 lb.
HW-N4X644 6.63 x 3.81 x 3.89 (168 x 97 x 99) 6.00 x 3.19 x 3.63 (153 x 81 x 92) 5.31 (135) 2.50 (64) 4.88 (124) 2.94 (75) 4.13 (105) 2.19 (56) 2 lbs.
HW-N4X832 8.41 x 3.63 x 3.14 (214 x 92 x 80) 7.82 x 3.03 x 2.87 (199 x 77 x 73) 7.16 (182) 2.38 (60) 7.00 (178) 2.75 (70) 6.28 (160) 2.03 (52) 2 lbs.
HW-N4X844 8.88 x 3.81 x 3.89 (225 x 97 x 99) 8.26 x 3.19 x 3.63 (210 x 81 x 92) 7.56 (192) 2.50 (64) 7.13 (181) 2.94 (75) 6.38 (162) 2.19 (56) 2 lbs.
HW-N4X932 9.35 x 3.63 x 3.14 (237 x 92 x 80) 8.75 x 3.03 x 2.87 (222 x 77 x 73) 8.10 (206) 2.38 (60) 7.94 (202) 2.75 (70) 7.22 (183) 2.03 (52) 2 lbs.
HW-N4X1144 11.13 x 3.81 x 3.89 (283 x 97 x99) 10.51 x 3.19 x 3.63 (267 x 81 x 92) 9.81 (249) 2.50 (64) 9.37 (238) 2.94 (75) 8.63 (219) 2.19 (56) 2 lbs.
HW-N4X1432 13.78 x 3.63 x 3.14 (350 x 92 x 80) 13.19 x 3.03 x 2.87 (335 x 77 x 73) 12.53 (318) 2.38 (60) 12.37 (314) 2.75 (70) 11.66 (296) 2.03 (52) 2 lbs.
HW-N4X1732 17.35 x 3.63 x 3.14 (441 x 92 x 80) 16.75 x 3.03 x 2.87 (426 x 77 x 73) 16.10 (409) 2.50 (64) 15.94 (405) 2.75 (70) 15.22 (387) 2.03 (52) 3 lbs.
Note: No Subpanel required. Dimensions in inches (millimeters); letters
in table correspond to letters on dimensional drawings.
U L F i l e E 6 4 7 9 1 C S A F i l e 2 2 2 8 7 3