Wiegmann Non-Metallic Series - Manual (Page 6)

www.hubbell-wiegmann.com
Data Subject To Change Without Notice
B N 4 - S S S E R I E S E N C L O S U R E S
N E M A 4 X J I C C L A M P C O V E R W A L L - M O U N T
E6
F E AT U R E S - S P E C I F I C AT I O N S
Applications
Provides unmatched protection for
housing electrical components in
highly corrosive environments. This
enclosure is used in indoor and out-
door settings that are frequently wet
or have constant exposure to water,
other liquids, or contaminants.
Construction
• Bodies and doors fabricated
from 16 gauge type 304 or 316L
stainless steel
• Continuously welded seams ground
smooth, less knockouts or holes
Industry Standards
UL 50, Types 4, 4X, 12 & 13
(6 X 6 X 4 & above)
UL 508, Types 4, 4X, 12 & 13 (6 X 4 X
3 & smaller)
CSA Certified, Types 4 & 12
NEMA/EEMAC Type 4, 4X, 12 & 13
JIC EL-1-71
UL Files E23553, E64791
CSA File LL66078
BACK PANEL
CATALOG NUMBER ENCLOSURE SIZE
CATALOG NUMBER*
BACK PANEL MOUNTING OVERALL
F G I J K N O P Q
304 SS 316L SS
H X W X D
WHITE 304 SS “G”
SIZE A X B C X E L X M
BN4040403SS BN4040403SSA
4.00x4.00x3.00
— — — —
4.75x2.00 5.50x5.63 2.53 4.31 3.00
—
1.38 1.38 2.53 0.63 4.31
(102x102x76) (121x51) (140x143) (64) (109) (76) (35) (35) (64) (16) (110)
BN4060403SS BN4060403SSA
6.00x4.00x3.00
P0604 P0604SS P0604G
4.88x2.88 6.75x2.00 7.50x5.63 2.53 4.31 3.00 0.56 1.38 2.38 2.53 0.63 6.31|
(152x102x76) (124x73) (171x51) (191x143) (64) (109) (76) (14) (35) (60) (64) (16) (160)
BN4060604SS BN4060604SSA
6.00x6.00x4.00
P0606 P0606SS P0606G
4.88x4.88 6.75x4.00 7.50x7.63 3.53 6.31 5.00 0.56 2.38 2.38 3.53 0.63 6.31
(152x152x102) (124x124) (171x102) (191x194) (90) (160) (127) (14) (60) (60) (90) (16) (160)
BN4080604SS BN4080604SSA
8.00x6.00x4.00
P0806 P0806SS P0806G
6.88x4.88 8.75x4.00 9.50x7.63 3.53 6.31 5.00 0.56 2.38 3.38 3.53 0.63 8.31
(203x152x102) (175x124) (222x102) (241x194) (90) (160) (127) (14) (60) (86) (90) (16) (211)
BN4100804SS BN4100804SSA
10.00x8.00x4.00
P1008 P1008SS P1008G
8.88x6.88 10.75x6.00 11.50x9.63 3.53 8.31 7.00 0.56 3.38 1.50 3.53 0.63 10.31
(254x203x102) (226x175) (273x152) (292x244) (90) (211) (178) (14) (86) (38) (90) (16) (262)
BN4121005SS BN4121005SSA
12.00x10.00x5.00
P1210 P1210SS P1210G
10.88x8.88 12.75x8.00 13.50x11.63 4.53 10.31 9.00 0.56 2.00 3.00 4.53 0.63 12.31
(305x254x127) (276x226) (324x203) (343x295) (115) (262) (229) (14) (51) (76) (115) (16) (313)
BN4141206SS BN4141206SSA
14.00x12.00x6.00
P1412 P1412SS P1412G
12.88x10.88 14.75x10.00 15.50x13.63 5.53 12.31 11.00 0.56 2.00 3.00 5.53 0.63 14.31
(356x305x152) (327x276) (375x254) (394x346) (141) (313) (279) (14) (51) (76) (141) (16) (364)
BN4161406SS BN4161406SSA
16.00x14.00x6.00
P1614 P1614SS P1614G
14.88x12.88 16.75x12.00 17.50x15.63 5.53 14.31 13.00 0.56 3.50 1.50 5.53 0.63 16.31
(406x356x152) (378x327) (425x305) (445x397) (141) (363) (330) (14) (89) (38) (141) (16) (414)
B N 4 - S S S E R I E S J I C C L A M P C O V E R S TA I N L E S S E N C L O S U R E S
*Back panels must be ordered separately.
BN4060604SS
• Sealed with poured in place
polyurethane gasket
• External mounting plates, top and
bottom of enclosure
• Weldnuts are provided on models
6.00" x 4.00" and larger to secure
optional panel
• Stainless steel screws and clamps
on four sides of cover assure
watertight seal
• Grounding provisions provided
• Optional panels and terminal kits
must be ordered separately
Finish
• Cover and outside of enclosure
have a smooth grained finish
• Optional back panels are white
polyester powder or grained finish
stainless steel
• Optional “G” panels have a con-
ductive finish (See page I2)
Accessories
• Back panels (reference tables)
• See pages J1-J22