Wiegmann Non-Metallic Series - Manual (Page 44)

www.hubbell-wiegmann.com
Data Subject To Change Without Notice
W A - S S F S D N 4 3 P T S E R I E S E N C L O S U R E S
N E M A 4 X 3 0 4 S TA I N L E S S F R E E S TA N D I N G T W O D O O R
E44
F E AT U R E S - S P E C I F I C AT I O N S
Industry Standards
UL 508, Type 12
CSA Certified, Type 12
NEMA/EEMAC Type 12
(Types 4 & 4X pending)
UL File E64791
CSA File LL66078
BACK PANEL CATALOG NUMBER ENCLOSURE SIZE
CATALOG NUMBER*
BACK PANEL
A F
304 SS
H X W X D
WHITE “G”
SIZE A X B
WA604818SSFSDN43PT 60.06x48.06x18.06 (1526x1221x459) WA60P48F1 WA60P48F1G 56.00x44.00 (1422x1118) 23.13 (588) 32.06 (814)
WA724818SSFSDN43PT 72.06x48.06x18.06 (1830x1221x459) WA72P48F1 WA72P48F1G 68.00x44.00 (1727x1118) 23.13 (588) 32.06 (814)
WA724824SSFSDN43PT 72.06x48.06x24.06 (1830x1221x611) WA72P48F1 WA72P48F1G 68.00x44.00 (1727x1118) 29.13 (740) 38.06 (967)
WA726018SSFSDN43PT 72.06x60.06x18.06 (1830x1526x459) WA72P60F1 WA72P60F1G 68.00x56.00 (1727x1422) 29.13 (740) 38.06 (967)
WA726024SSFSDN43PT 72.06x60.06x24.06 (1830x1526x611) WA72P60F1 WA72P60F1G 68.00x56.00 (1727x1422) 29.13 (740) 38.06 (967)
WA726036SSFSDN43PT 72.06x60.06x36.06 (1830x1526x916) WA72P60F1 WA72P60F1G 68.00x56.00 (1727x1422) 29.13 (740) 38.06 (967)
WA727218SSFSDN43PT 72.06x72.06x18.06 (1830x1830x459) WA72P72F1 WA72P72F1G 68.00x68.00 (1727x1727) 29.13 (740) 38.06 (967)
WA727224SSFSDN43PT 72.06x72.06x24.06 (1830x1830x611) WA72P72F1 WA72P72F1G 68.00x68.00 (1727x1727) 29.13 (740) 38.06 (967)
WA904820SSFSDN43PT 90.06x48.06x20.06 (2288x1221x510) WA90P48F1 WA90P48F1G 86.00x44.00 (2184x1118) 38.13 (969) 47.06 (1195)
WA907220SSFSDN43PT 90.06x72.06x20.06 (2288x1830x510) WA90P72F1 WA90P72F1G 86.00x68.00 (2184x1727) 38.13 (969) 47.06 (1195)
WA907224SSFSDN43PT 90.06x72.06x24.06 (2288x1830x611) WA90P72F1 WA90P72F1G 86.00x68.00 (2184x1727) 38.13 (969) 47.06 (1195)
WA907236SSFSDN43PT 90.06x72.06x36.06 (2288x1830x916) WA90P72F1 WA90P72F1G 86.00x68.00 (2184x1727) 38.13 (969) 47.06 (1195)
W A - S S F S D N 4 3 P T S E R I E S T W O D O O R 3 P T H A N D L E S TA I N L E S S E N C L O S U R E S
• Rolled lip around three sides of
door and along top of enclosures
opening excludes liquids and
contaminants from entering
• 3 PT 316L SS Padlocking Vault
Handles
• Heavy gauge continuous hinge
• Doors are removable by pulling
stainless steel continuous hinge pin
• Removable print pocket is provided
• Heavy duty removable lifting eyes
• Doors are sealed with poured in
place polyurethane gasket
• Grounding provisions provided
Applications
Designed to house electrical and
electronic controls, terminals, and
instruments in areas that are regularly
hosed down or are otherwise very
wet. Enclosures are also suitable for
outdoor applications.
Construction
• Body and doors fabricated from
12 gauge 304 stainless steel
• Continuously welded seams ground
smooth, less knockouts or holes
• “Uni-strut” mounting channels are
welded horizontally to interior body
sides, top, bottom and center
• Optional swing, half, full and rack
panels can be mounted anywhere
along “uni-strut” channel
*Back panels must be ordered separately.
Finish
• Top, sides and doors have a
smooth grained finish, interior has
a standard commercial finish
• Optional back panels are white
polyester powder (See pages
I8-I13)
• Optional “G” panels have a con-
ductive finish (See pages I8-I13)
Accessories
• Back panels (reference tables)
• See pages J1-J22