Maple Systems OIT Family - Manual (Page 53)

Bar Graph
(OIT5400 only)
This format is used to represent a signed 16-bit PLC register as a bar graph. Each bar
graph can be configured to display horizontally or vertically. The width and height of the
bar graph can be defined, and an optional percentage sign can be displayed in the middle
of the bar graph. Low and high limits are established to set the range that the bar graph
covers (for example: If the PLC register range always falls within -100 to +100, then the
low and high limits for the bar graph are set to -100 and +100, respectively, for maximum
resolution).
Access: Read Only
Attributes: Bar Graph
Time (12 Hour)
This format is used to display the current time from the OIT’s real-time clock in
HH:MMn format (for example: 1:00p).
Access: Read Only
Time (24 Hour)
This format is used to display the current time from the OIT’s real-time clock in HH:MM
format (for example: 13:00).
Access: Read Only
Date (US)
This format is used to display the current date from the OIT’s real-time clock in
MM/DD/YY format (for example: 12/31/98).
Access: Read Only
Date (European)
This format is used to display the current date from the OIT’s read-time clock in
DD/MM/YY format (for example: 31/12/98).
Access: Read Only
PLC Register Monitors 53
1010-0099, Rev. 07
S1
S2
S3
S4
S5
S6
S7
S8
Message Alarm
Run Print