Maple Systems OIT Family - Manual (Page 73)

To configure a timer event:
1. From the Configuration menu, choose Timer Events Editor. The Timer Events Editor
dialog box appears.
NOTE:The Download Clock To PLC group box is not related to Timer Events. For more
information on downloading the time and or date from the OIT to the PLC, refer to
CHAPTER 10: Using the Real-Time Clock.
2. In the Day group box, select the option button that corresponds to the day of the week
you want the timer event to activate. A daily option is also available.
3. In the 24 Hour Time group box, select the Hour and Minute (in 24 hour format) that
corresponds to the time of day you want the timer event to activate.
4. If you want the OIT to display a stored screen when the timer event activates:
• in the Screen group box, select the Enabled? check box
• in the Screen group box, select the screen number you want displayed
5. In the Coil Address and Sub-Element group boxes, select the PLC coil address to set
when the timer event activates.
6. In the Preset group box, select the value (0 or 1) to place in the selected PLC coil
address when the timer event activates.
7. Choose the Add To Events List button. The timer event is added to the Events List
group box.
8. Choose the Done button to return to the OITware-200 main screen.
Displaying Stored Screens 73
1010-0099, Rev. 07