Maple Systems OIT Family - Manual (Page 77)

6. If you selected Screen, in the Screen scroll box, select the stored screen number to
display when this global function key is pressed.
7. If you selected Screen and want to use the password feature, in the Password drop
down list box, select the appropriate password level. For more information on
passwords, refer to the Passwords section in this chapter.
8. Repeat steps 4 through 7 for each global function key.
9. Choose the Done button to return to the OITware-200 main screen.
Screen Dependent Function Keys
Each screen dependent function key can be configured to perform a different function in
each of the OIT’s stored screens. In addition, each screen dependent function key can be
configured with a global function.
When you start a new project in OITware-200, each screen dependent function key’s
global function is set as disabled. If you want a screen dependent function key to perform
the same function in many or all of the OIT’s stored screens, you should configure its
global function for that purpose.
When you configure a new stored screen, each screen dependent function key defaults to
its global function. However, you can override the global function, by configuring the
screen dependent function key specifically for use in the new stored screen.
Unlike the global function key coils, the OIT does not initialize the screen dependent
function key coils during power up. Instead, when the OIT displays a stored screen, the
associated Push On/Off screen dependent function keys are set to match the state of the
function key coils in the PLC.
Configuring the global function for each screen dependent function key:
1. In the screen editor, choose the button for any screen dependent function key. The
Screen-Dependent Function Key Editor dialog box appears.
2. Choose the Default Settings button. The Screen-Dependent Function Key Default
Actions dialog box appears.
Key Types 77
1010-0099, Rev. 07