Maple Systems OIT Family - Manual (Page 97)

Configuration
To configure the Function Key LEDs:
1. From the Configuration menu, choose LED Control Editor. The LED Control Editor
dialog box appears.
2. In the Function Key LEDs group box, in the Function Key LED Controlled By group
box, select the By PLC or By OIT option button for each Function Key LED.
3. If any of the Function Key LEDs are being controlled by a push on/off function key
in the OIT, in the Function Key LEDs group box, in the Function Key LED Behavior
group box, select the On/Off, Off/On, Blink/Off, or Off/Blink option button for each
applicable Function Key LED.
4. If any of the Function Key LEDs are being controlled by the PLC, in the Function
Key LEDs group box, in the Address scroll box, select the starting PLC coil address.
5. Choose the Done button to return to the OITware-200 main screen.
Using the LEDs 97
1010-0099, Rev. 07