Watlow EZwarePlus Programming - Manual (Page 123)

EZwarePlus Programming Manual 115
LW9222 Current access classes 16-bit binary Indicates the Access Classes currently
allowed. Bit 0 indicates Class A; Bit 5
indicates Class F.
LW9500,
LW9501
New password, user 1 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9502,
LW9503
New password, user 2 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9504,
LW9505
New password, user 3 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9506,
LW9507
New password, user 4 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9508,
LW9509
New password, user 5 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9510,
LW9511
New password, user 6 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9512,
LW9513
New password, user 7 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9514,
LW9515
New password, user 8 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9516,
LW9517
New password, user 9 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9518,
LW9519
New password, user 10 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9520,
LW9521
New password, user 11 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
LW9522,
LW9523
New password, user 12 32-bit unsigned Loaded into security system when
LB9061 is set momentarily
To log out a user, use a Set Bit Object to momentarily set bit LB9050.
When Enhanced security mode is selected, each user can be assigned up to twelve access classes (A-L).
Passwords and User Names can be alphanumeric, which are stored in local memory as assigned by the Control
address. One user is reserved as an administrator, which has complete access. The Option List object can be
configured to display the User Names, providing a quick way to select a user to log-in.
In addition, up to 127 more user accounts can be added using the Administrator Tools. See “Chapter 13 –
Security” and “Chapter 14 – Administrator Tools” for more information.
Project password (MTP file): Select this option to set a password in order to prevent unauthorized users from
opening and editing a project. The correct password must be entered in order to open the password-
protected project.
1010-1015, Rev. 03