Watlow EZwarePlus Programming - Manual (Page 128)

120 EZwarePlus Programming Manual
SMTP settings: SMTP (Simple Mail Transfer Protocol) is an internet standard for sending email across IP
networks. Contact your IT or LAN administration staff for specific information on entering the SMTP settings.
Server: Enter the SMTP server address for your particular email provider.
Port: Enter the port number used by the email server for SMTP communications.
User name: Enter the user name that the email account requires (usually the email address).
Password: Enter the password associated with the email account.
Confirm Password: Enter the password again. It must match the first password entry.
Log on using Secure Password Authentication (SPA): Check this box if your email server requires
Secure Password Authentication.
Use the following type of encrypted connection: Check this box if your email server requires TLS or
SSL encryption.
Sender information: Configures how the sender (HMI) will appear to the recipients.
Name: Check “Use HMI name” to use the name assigned to the HMI in the System Parameters Device
List. If unchecked, a name can be assigned in the field below.
Mail address: This is the “From” email address as it will appear in the email that is sent.
See “Chapter 12 – Capturing Alarms and Events” for more information on using the email feature.
1010-1015, Rev. 03