Watlow EZwarePlus Programming - Manual (Page 73)

EZwarePlus Programming Manual 65
b. Save file as *.emi for extended memory files.
 You must use file names which correspond to the ten extended memory areas
preconfigured in the HMI (ex. em0.emi, em1.emi, …, em9.emi).
c. Save file as *.csv to open the file in applications such as Microsoft Excel.
8. Once the file is saved, you can copy the recipe file to your HMI by:
a. Procedure 1-- Downloading the file using the Utility Manager:
i. With the computer connected to your HMI, click Download.
ii. On the Download dialog box, check the RW enable box, then select the recipe file.
b. Procedure 2 -- Downloading using a SD card or USB Flash Drive:
i. Attach an SD card or USB Flash Drive to your computer.
ii. In Project Manager, click Build Download Data for SD/USB Disk button.
iii. Select the folder to save download data. Enter the SD card or USB Flash drive
location.
1010-1015, Rev. 03