Watlow EZwarePlus Programming - Manual (Page 153)

EZwarePlus Programming Manual 145
 To display the fast selection button:
1. Select Edit > System Parameters. The System Parameters Setting Dialog
appears. Select the General tab.
2. In the Fast selection button section, select Enable from the Attribute drop-down menu.
3. Select either Right or Left from the Position drop-down menu to select whether the button will appear in the
right-lower corner or left-lower corner of the screen.
4. Click Settings... Click the Use shape checkbox, and then click the Shape Library… button.
5. Select a shape for your fast selection button and click OK.
6. Click OK.
 The Fast Selection window can only call full screen windows, not popup windows. Therefore, you cannot use
Function Key Objects configured to Display popup window in Fast Selection windows.
1010-1015, Rev. 03