Watlow EZwarePlus Programming - Manual (Page 127)

EZwarePlus Programming Manual 119
E-Mail tab settings:
The e-Mail tab is used to enable and configure the email feature in EZwarePlus. Alarms can be configured to
automatically send an email to a list of recipients when the alarm occurs and when the alarm is cleared. In
addition, a screenshot of the HMI’s screen can be attached to the email.
Enable e-Mail function: Check this box to enable the emailing feature.
Use existing contact settings on HMI: Email SMTP settings and contacts can be imported to the HMI from a
USB flash drive using the Administrator Tools. When this box is checked, emails will be sent using the settings
in the HMI.
1010-1015, Rev. 03