Watlow EZwarePlus Programming - Manual (Page 22)

14 EZwarePlus Programming Manual
The Popup download window option allows you to turn on or off whether the Download dialog window
appears on the screen when a USB flash drive is connected to the USB port on the HMI. The Restart after
download/upload option causes the HMI to reboot after a download or upload from a USB flash drive or SD
card, when selected.
Viewing System Information
 To view system information:
1. Open the System Setup Toolbar as described above, and click the System Information icon. A dialog will be
displayed with two tabs.
2. Click on the Network tab to display the current IP settings.
3. Click on the Version tab to display the current firmware information.
1010-1015, Rev. 03