Watlow EZ-ZONE RMC User Manual
Page 86
Watlow EZ-ZONE
®
RMC Module
•
83
•
Chapter 4 Setup Page
RMC Module • Setup Page
Dis-
play
Parameter Name
Description
Range
Default
Modbus
Relative
Address
CIP
Class
Instance
Attribute
hex (dec)
Profibus
Index
Parameter
ID
Data
Type
& Read/
Write
[``Fn]
[ Fn]
Output Process (1, 3, 5
or 7)
Function
Set the type of func-
tion that will drive this
output.
[`oFF]
Off (62)
[``Ai]
Analog Input (142)
[CUrr]
Current (22)
[`C;Pr]
Cool Power, Control
Loop (161)
[`h;Pr]
Heat Power, Control
Loop (160)
[PWr]
Power, Control Loop (73)
[`Lnr]
Linearization (238)
[MAt]
Math (240)
[``Pu]
Process Value (241)
[`SP;C]
Set Point Closed, Con-
trol Loop (242)
[`SP;o]
Set Point Open, Control
Loop (243)
[SoF;1]
Special Function Output
1 (1532)
[SoF;2]
Special Function Output
2 (1533)
[SoF;3]
Special Function Output
3 (1534)
[SoF;4]
Special Function Output
4 (1535)
[`uAr]
Variable (245)
Off
842 (1)
890 (3)
938 (5)
986 (7)
0x76 (118)
1 to 4
2
96
18002
uint
RWES
[``Fi]
[ Fi]
Output Process (1, 3, 5
or 7)
Function Instance
Set the instance of the
function selected above.
1 to 250
1
846 (1)
894 (3)
942 (5)
990 (7)
0x76 (118)
1 to 4
4
98
18004
uint
RWES
[`S2;A]
[ ZS.A]
Output Process (1, 3, 5
or 7)
Source Zone A
Set the zone of the func-
tion selected above.
0 to 16
0
- - - -
0x76 (118)
1 to 4
0x13 (19)
- - - -
18019
uint
RWES
[`S;Lo]
[ S.Lo]
Output Process (1, 3, 5
or 7)
Scale Low
Set the scale low for
process output in electri-
cal units. This value, in
volts or milliamps, will
correspond to
0% PID power output or
the range low value.
-100.0 to 100.0
0.00
856 (1)
904 (3)
952 (5)
1000 (7)
0x76 (118)
1 to 4
9
99
18009
float
RWES
Note:
Some values will be rounded off to fit in the four-character display .
Full values can be read with other interfaces .
Note:
If there is only one instance of a menu, no submenus will appear .
** These parameters/prompts are available in these menus with firmware revisions 6 .0 and
above .
R: Read
W: Write
E:
EEPROM
S:
User Set