Yokogawa RotaMASS 3-Series - Manual (Page 71)

IM 01R04B08-00E-E 1st edition February 15, 2012 -00 All Rights Reserved. Copyright © 2012, Rota Yokogawa
<10. GENERAL SPECIFICATIONS>
10-1
10. GENERAL SPECIFICATIONS
For specifications other than below, refer to IM 01R04B04-00E.
MODBUS SPECIFICATIONS
- MODBUS communication (/MB1)
- Physical interface RS485 according EIA/TIA-485
- Addresses: 1 to 247
- Baud rates: 1200, 2400, 4800, 9600, 19200, 38400, 57600, 76800, 115200
- Data formats: E/1, O/1, N/1, N/2 (parity/stop bits)
- Modes: RTU, ASCII
MODEL, SUFFIX AND OPTION CODES
Integral Type RCCT3, Model and Suffix Code
Model Suffix Code Description Restrictions
RCCT34
RCCT36
RCCT38
RCCT39
RCCT39/IR
RCCT39/XR Nominal Value : 3 t/h = 50 kg/min
Nominal Value : 10 t/h = 170 kg/min
Nominal Value : 32 t/h = 533 kg/min
Nominal Value : 100 t/h = 1670 kg/min
Nominal Value : 250 t/h = 4170 kg/min
Nominal Value : 500 t/h = 8340 kg/min
only with /HP
Power supply -A
-D 90 - 264 V AC
24 V DC
Indicator direction H1
H2
V0
N0 Detector installation horizontal, tubes down
Detector installation horizontal, tubes up
Detector installation vertical
Without indicator recom. for liquid service
recom. for gas service /GA
Cable conduit connection M
A M20 x 1.5, female thread with cable glands
ANSI ½´´ NPT, female thread without cable glands
mandatory with /FF1, /FF2
Process connection size 1) 23
01
02
04
05
06
08
10
12
15
20 ¾´´
DN 15, ½´´
DN 25, 1´´
DN 40, 1½´´
DN 50, 2´´
DN 65, 2½´´
DN 80, 3´´
DN 100, 4´´
DN 125, 5´´
DN 150, 6´´
DN 200, 8´´ see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
Process connection rating and style 1) A1
A2
A3
A4
A5
D2
D4
D5
D6
J1
J2
S2
S4
S8
G9
T9 ASME flange class 150, process connection dim. + facing acc. ASME B16.5
ASME flange class 300, process connection dim. + facing acc. ASME B16.5
ASME flange class 600, process connection dim. + facing acc. ASME B16.5
ASME flange class 900, process connection dim. + facing acc. ASME B16.5
ASME flange class 1500, process connection dim. + facing acc. ASME B16.5
EN flange PN 16, process connection dim. + facing acc. EN 1092-1 Form B1
EN flange PN 40, process connection dim. + facing acc. EN 1092-1 Form B1
EN flange PN 63, process connection dim. + facing acc. EN 1092-1 Form B1
EN flange PN 100, process connection dim. + facing acc. EN 1092-1 Form B1
JIS flange 10K, JIS B 2220
JIS flange 20K, JIS B 2220
Thread acc. DIN 11851
Clamp, process connection dimensions acc. DIN 32676
Clamp, process connection dimensions acc. Tri-Clover (Tri-Clamp) and ½´´ Mini Clamp
G, female thread
NPT, female thread see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
see table 11
Material of wetted parts 1) SL
HC Stainless steel 316L (1.4404)
Hastelloy C-22 (2.4602)
only RCCT34 to 39/IR
1) see selection table „Process connection and materials“ (table 11 in IM 01R04B04-00x)