Yokogawa Button Operated DX2000 - Manual (Page 63)

3-2
IM 04L41B01-62EN
Attribute name Set value/choice
(Underlined items are initial
set values)
Description
Batch group number Setting range: 1 to multi-
batch number set by the
basic settings of the DX
recorder
DX1000: [1] to [6]
DX2000 standard memory:
[1] to [6]
DX2000 expanded memory:
[1] to [12]
This is the batch group number that can be selected within the range
of the number of multibatches set in the basic settings on the DX
recorder.
This item cannot be set if MultiBatch is turned Off.
Display Grp no When multi-batch is Off
DX1000: [1] to [10]
DX2000: [1] to [36]
When multi-batch is On
DX1000: [1] to [6]
DX2000: [1] to [12] Group control is performed for components. Display groups can be
switched with the left and right arrow keys on the execution screen of
the DX recorder.
Display on the builder screen of the DX recorder is made as “Group
No.”.
For components having a group No. in the attributes (trend and scale),
the group No. is switched.
For components having only a channel No., the channel No. is switched.
Display group
switching(can only
be set with a Version
4.01 screen and a
Version 4.11 screen)
[Off], [On] Sets whether or not to switch display groups.
Off: Display groups not switched
On: Display groups switched
Note
If the status area is set to No display, components move or their heights change. To restore
positions, click the [Undo] icon on the tool bar. Only one level of Undo is available in this case.
If the status area is set to No display and even just one edit is made to the screen, you cannot
return to state before the status area was set to No display. Please be aware of this.
3.1 Screen Attributes