Yokogawa DAQWORX - Manual (Page 13)

2-2 IM WX1-07E
2.2 Enterng Envronment Settngs
This software includes an automatic model determination function, enabling automatic
acquisition of the connected devices' (temperature controllers and signal conditioners)
model names, tag information, and Modbus address when you enter the appropriate
serial port settings, IP addresses, and/or port numbers.
The following environment settings are entered.
• Serial port settings (when the communication mode is COM)
• Settings for the connected devices
• Data acquisition condition
• TCP/IP port settings for the monitor server
• Tag settings (enter the tag name and decimal place as needed)
Seral Port Settngs (When the Communcaton Mode s COM)
Procedure
1. Click the Seral Settng tab or choose Vew > Seral Settng from the menu bar.
The Serial Setting page in displayed.
Copies the setting
in the first item of
the selection to all
of the items in the
selection
Turns selected range ON/OFF collectively
Drag to select
a range of items
Click to turn a single item ON/OFF
Click to
select/clear
all rows Click to display a
list of options
2. Turn ON the port numbers to be used, and set the baud rate, and parity.
Port number: ON (blue)/OFF (gray)
Baud rate: 4800, 9600, 19200, 38400
Parity: NONE, ODD, EVEN