Yokogawa DAQWORX - Manual (Page 28)

2-17 IM WX1-07E
1
2
3
Index
Operat
ng
Performng a Wrte Test
3. Specify the Output Values of the tags on which you wish to perform the output
test in the output tab page.
4. Select the tags on which to perform the output test
5. Click the Output Test button.
The output values are written to registers, then the values are acquired from the
write registers and the loaded results are displayed in the loaded value column in
the output tab page.
Stoppng the Read Test
6. Click the Stop montor button.
The Read Test is concluded.
2.5 Performng Communcaton Tests of Connected Devces