Yokogawa DAQWORX - Manual (Page 15)

2-4 IM WX1-07E
2.2 Enterng Envronment Settngs
Modbus Address (for Ports Set to COM)
3. Click an address. The Address Selecton dialog box opens.
4. Enter the Modbus address.
Modbus address: 1–99
If you wll perform automatc model determnaton ncludng for the Modbus
address, choose Unknown.
Automatc Model Determnaton
5. After specifying the communication methods and addresses, drag numbers to
specify the range for automatic model determination.
Automatic detection button
Clears the contents of
the status boxes.
Drag to select a range for automatic model determination.
6. Click the Automatc detecton button at the bottom of the screen, click the
Automatc determnaton button in the toolbar, or choose Communcaton >
Automatc detecton from the menu bar.
Model name, control mode, control output, option functions, and tag information
is automatically acquired. A loop back test is also executed at the same time.
If the test concludes without errors, a status of “OK” is displayed. (“Not OK” is
displayed if an abnormality occurred.)