Yokogawa DAQWORX - Manual (Page 26)

2-15 IM WX1-07E
1
2
3
Index
Operat
ng
2.5 Performng Communcaton Tests of
Connected Devces
Before starting data acquisition, you can perform a loop back test, read test, and write
test between connected devices.
Performng the Loop Back Test
Using the loop back test you can check the specified communication method and
connection status with the device at the specified address.
Note
The loop back test can not be performed during data acquisition.
Procedure
1. Click the Model tab or choose Vew > Model from the menu bar.
The Model tab is displayed.
Select/clear all items
Drag to select a range for collective setting
or the loop back test
Click to clear the
contents of the status
Result appears
OK: Normal
Not OK: No response
2. Drag to select the numbers on which you wish to perform the loop back test.
3. Click the Loop Back Test button.
The result appears in the status column.
OK: Normal
Not OK: No response
Note
• If the result is Not OK, check whether the communication settings of the software and target
device match.
• If the loop back test will be performed on multiple devices, individual tests are performed
even if a communication error occurs part way through.