Yokogawa Data Logging Software GA10 - Manual (Page 22)

2-6
IM 04L65B01-01EN
2
Scroll down to find DLGServer in the Name column.
Check the Status column.
The DLGServer status should be indicating Started,
and Startup Type should be set to Automatic.
Status: Started DLGServer
Startup Type: Automatic
If the DLGServer status indicates Started, the
GA10 server is running.
3
After confirmation, close the window.
Note
If Startup Type is set to Automatic, the server will start
and stop when Windows start and stop.
2.6.2 Changing the Server Port Number
By default, the GA10 server port number is set to
50310. If necessary, change the port number by
following the procedure below.
1
On the PC that the server is installed, open Control
Panel from the Start menu.
2
Click Administrative Tools to display a list of
available tools.
3
Double-click Services.
The Services window appears.
4
Choose DLGServer.
5
On the Action menu, click Stop to stop the server.
6
Double-click DLGServer.
The DLGServer Properties appear.
7
In Startup parameters, type the following character
string.
/PORT=Number
Specify the new port number in “Number.”
Specify the port number in the range of 1025 to
65535 (excluding 50311).
8
Click Start.
9
Click OK to close the window.
Chapter 2 Preparation