3 entering a license number (ga10/ga10cl/ga10up), Entering a license number (ga10/ga10cl/ga10up) -7, Sec. 2.6.3 – Yokogawa Data Logging Software GA10 User Manual

Page 23: Important

Advertising
background image

2-7

IM 04L65B01-01EN

2.6.3 Entering a License Number (GA10/

GA10CL/GA10UP)

When entering a license number, use Windows

administrator privileges. If you are using Windows 7,

follow steps 1 and 2 below to start the software, and then

enter the license number.

• Checking the Remaining Trial Period

In the software, click

About on the Help menu, and

check the remaining number of days in the dialog

box that appears.

• Entering a License Number during the Trial Period

1

Right-click

Data Logging Software in the Start

menu.

2

On the shortcut menu, click

Run as administrator.

Data Logging Software starts.

3

Log in to the server.

4

On the

Help menu, click Input Server License.

A dialog box appears.

5

Type the license number, and click

Register.

The license number appears in the dialog box.

Note

After registering the license, you must restart the server.

For the procedure to restart the server, see

Sec. 2.6.1

.

• After the Trial Period Is Over

If the trial period expires, you will no longer be able

to log in. When you start the software, you will be

prompted to enter the license number. If you have

purchased a license, type the number.

• Upgrading to Increase the Number of Channels

(GA10UP)

To add an option that increases the number of

channels (tags), type the license number of the

option in the Input Server License dialog box shown

above.

The following table shows the maximum number of

tags in a project after adding options.

Name

Maximum Number of Tags

in a Project

Before

After

GA10UP -01

1 level upgrade

100

200

200

500

500

1000

1000

2000

-02

2 level upgrade

100

500

200

1000

500

2000

-03

3 level upgrade

100

1000

200

2000

-04

4 level upgrade

100

2000

• Adding a Client (GA10CL)

To add a client, use the installer InstallClientE_x86.

exe, which installs only clients. (InstallClientE_x64.

exe for the 64 bit edition)

You can download the installer from the following

URL.

www.smartdacplus.com/software/en/

The installaion procedure is the same as with the

basic license.

Installation procedure:

page 2-2

To register the license for the added client, click

Input License on the Help menu.

IMPORTANT

Do not change or delete files in the following folder: local

disk > ProgramData > Yokogawa > SMARTDAC+Data

Logging Software > Config.

These files contain user information, project setting

information, project status information, and device

information.

Chapter 2 Preparation

Advertising